1. Product Overview
The full name of DCX (R) distribution box is DCX (R) series combination distribution box.
This equipment complies with the International Electrotechnical Commission IEC439-1 "Low voltage switchgear and control equipment device", China's GB7251-1997 "Low voltage switchgear and control equipment device", China's national standards and machinery industry association JB/T9661-1999 and CQC CCC national compulsory certification content.
2. Product use
For power, lighting and power distribution. It can also be used for infrequent transitions of lines.
DCX(R) series combined distribution box is suitable for laboratories, laboratories, clean rooms, computer rooms, colleges and universities, scientific research, industrial and mining enterprises and civil buildings, AC 50Hz, voltage 380V/220V system and DC 440V/220 circuit for power, lighting distribution. It can also be used for infrequent transitions of lines.
DCX(R) series distribution box is pided into: DCX-10 type power socket box, DCX-20 type combined distribution box and DCX-30 type combined power socket box. It uses 86×86 mm as the base unit and can be combined in any form according to needs. It is combined in a certain way and has overload and short circuit protection.
1. DCX(R) series combined distribution box is made of thin steel plate mold pressing, surrounded by knock-out holes for entering and exiting the line. The panels are painted in a variety of colors that harmonize with the building, and the user can choose according to his needs.
2. The distribution box is an indoor device, which is pided into exposed and concealed installation, the panel is concave, and is equipped with grounding and zero terminals, and the zero terminal block can be selected arbitrarily.
3. The distribution box is equipped with a set of mounting frames, which are drilled with various screw holes for the installation of various electrical components. The 86×86mm socket needs to be installed on the power socket mounting plate and then combined with the box, and other components need to be installed on the assembly plate and then combined with the box. The distribution box is rectangular, all horizontally loaded, such as vertical, must be stated when ordering.
4. If the bottom of the box needs to be deepened due to installation, it must be explained when ordering, otherwise it will be produced according to conventional standards.
